--[[--------------------------< F O R W A R D D E C L A R A T I O N S >--------------------------------------
]]
local cfg; -- table of tables imported from selected Module:Citation/CS1/Configuration
--[[--------------------------< H Y P H E N _ T O _ D A S H >-------------------------------------------------
Converts a hyphen to a dash
]]
--
local function hyphen_to_dash( str )
if not is_set(str) or str:match( "[%[%]{}<>]" ) ~= nil then
return str;
end
return str:gsub( '-', '–' );
end
--[[--------------------------< I S _ S E T >------------------------------------------------------------------
Returns true if argument is set; false otherwise. Argument is 'set' when it exists (not nil) or when it is not an empty string.
This function is global because it is called from both this module and from Date validation
]]
function is_set( var )
return not (var == nil or var == '');
end
--[[--------------------------< F I R S T _ S E T >------------------------------------------------------------
Locates and returns the first set value in a table of values where the order established in the table,
left-to-right (or top-to-bottom), is the order in which the values are evaluated. Returns nil if none are set.
This version replaces the original 'for _, val in pairs do' and a similar version that used ipairs. With the pairs
version the order of evaluation could not be guaranteed. With the ipairs version, a nil value would terminate
the for-loop before it reached the actual end of the list.
]]
local function first_set (list, count)
local i = 1;
while i <= count do -- loop through all items in list
if is_set( list[i] ) then
return list[i]; -- return the first set list member
end
i = i + 1; -- point to next
end
end
--[[--------------------------< I N _ A R R A Y >--------------------------------------------------------------
Whether needle is in haystack
]]
local function in_array( needle, haystack )
if needle == nil then
return false;
end
for n,v in ipairs( haystack ) do
if v == needle then
return n;
end
end
return false;
end
--[[--------------------------< S U B S T I T U T E >----------------------------------------------------------
Populates numbered arguments in a message string using an argument table.
]]
local function substitute( msg, args )
return args and mw.message.newRawMessage( msg, args ):plain() or msg;
end
--[[--------------------------< H A S _ A C C E P T _ A S _ W R I T T E N >------------------------------------
When <str> is wholly wrapped in accept-as-written markup, return <str> without markup and true; return <str> and false else
with allow_empty = false, <str> must have at least one character inside the markup
with allow_empty = true, <str> the markup frame can be empty like (()) to distinguish an empty template parameter from the specific condition "has no applicable value" in citation-context.
After further evaluation the two cases might be merged at a later stage, but should be kept separated for now.
]]
local function has_accept_as_written (str, allow_empty)
local count;
if true == allow_empty then
str, count = str:gsub ('^%(%((.*)%)%)$', '%1'); -- allows (()) to be an empty set
else
str, count = str:gsub ('^%(%((.+)%)%)$', '%1');
end
return str, 0 ~= count;
end
--[[--------------------------< S A F E _ F O R _ I T A L I C S >----------------------------------------------
Protects a string that will be wrapped in wiki italic markup '' ... ''
Note: We cannot use <i> for italics, as the expected behavior for italics specified by ''...'' in the title is that
they will be inverted (i.e. unitalicized) in the resulting references. In addition, <i> and '' tend to interact
poorly under Mediawiki's HTML tidy.
]]
local function safe_for_italics (str)
if not is_set (str) then return str end
if str:sub (1, 1) == "'" then str = "<span></span>" .. str; end
if str:sub (-1, -1) == "'" then str = str .. "<span></span>"; end
-- Remove newlines as they break italics.
return str:gsub ('\n', ' ');
end
--[[--------------------------< W R A P _ S T Y L E >----------------------------------------------------------
Applies styling to various parameters. Supplied string is wrapped using a message_list configuration taking one
argument; protects italic styled parameters. Additional text taken from citation_config.presentation - the reason
this function is similar to but separate from wrap_msg().
]]
local function wrap_style (key, str)
if not is_set (str) then
return '';
elseif in_array (key, cfg.presentation['_safe_for_italics']) then
str = safe_for_italics (str);
end
return substitute (cfg.presentation[key], str);
end
--[[--------------------------< M A K E _ S E P _ L I S T >------------------------------------------------------------
make a separated list of items using provided separators.
<sep_list> - typically '<comma><space>'
<sep_list_pair> - typically '<space>and<space>'
<sep_list_end> - typically '<comma><space>and<space>' or '<comma><space>&<space>'
defaults to cfg.presentation['sep_list'], cfg.presentation['sep_list_pair'], and cfg.presentation['sep_list_end']
if <sep_list_end> is specified, <sep_list> and <sep_list_pair> must also be supplied
]]
local function make_sep_list (count, list_seq, sep_list, sep_list_pair, sep_list_end)
local list = '';
if not sep_list then -- set the defaults
sep_list = cfg.presentation['sep_list'];
sep_list_pair = cfg.presentation['sep_list_pair'];
sep_list_end = cfg.presentation['sep_list_end'];
end
if 2 >= count then
list = table.concat (list_seq, sep_list_pair); -- insert separator between two items; returns list_seq[1] then only one item
elseif 2 < count then
list = table.concat (list_seq, sep_list, 1, count - 1); -- concatenate all but last item with plain list separator
list = table.concat ({list, list_seq[count]}, sep_list_end); -- concatenate last item onto end of <list> with final separator
end
return list;
end
--[[--------------------------< S A F E _ J O I N >------------------------------------------------------------
Joins a sequence of strings together while checking for duplicate separation characters.
]]
local function safe_join( tbl, duplicate_char )
--[[
Note: we use string functions here, rather than ustring functions.
This has considerably faster performance and should work correctly as
long as the duplicate_char is strict ASCII. The strings
in tbl may be ASCII or UTF8.
]]
local str = ''; -- the output string
local comp = ''; -- what does 'comp' mean?
local end_chr = '';
local trim;
for _, value in ipairs( tbl ) do
if value == nil then value = ''; end
if str == '' then -- if output string is empty
str = value; -- assign value to it (first time through the loop)
elseif value ~= '' then
if value:sub(1,1) == '<' then -- Special case of values enclosed in spans and other markup.
comp = value:gsub( "%b<>", "" ); -- remove html markup (<span>string</span> -> string)
else
comp = value;
end
-- typically duplicate_char is sepc
if comp:sub(1,1) == duplicate_char then -- is first charactier same as duplicate_char? why test first character?
-- Because individual string segments often (always?) begin with terminal punct for th
-- preceding segment: 'First element' .. 'sepc next element' .. etc?
trim = false;
end_chr = str:sub(-1,-1); -- get the last character of the output string
-- str = str .. "<HERE(enchr=" .. end_chr.. ")" -- debug stuff?
if end_chr == duplicate_char then -- if same as separator
str = str:sub(1,-2); -- remove it
elseif end_chr == "'" then -- if it might be wikimarkup
if str:sub(-3,-1) == duplicate_char .. "''" then -- if last three chars of str are sepc''
str = str:sub(1, -4) .. "''"; -- remove them and add back ''
elseif str:sub(-5,-1) == duplicate_char .. "]]''" then -- if last five chars of str are sepc]]''
trim = true; -- why? why do this and next differently from previous?
elseif str:sub(-4,-1) == duplicate_char .. "]''" then -- if last four chars of str are sepc]''
trim = true; -- same question
end
elseif end_chr == "]" then -- if it might be wikimarkup
if str:sub(-3,-1) == duplicate_char .. "]]" then -- if last three chars of str are sepc]] wikilink
trim = true;
elseif str:sub(-2,-1) == duplicate_char .. "]" then -- if last two chars of str are sepc] external link
trim = true;
elseif str:sub(-4,-1) == duplicate_char .. "'']" then -- normal case when |url=something & |title=Title.
trim = true;
end
elseif end_chr == " " then -- if last char of output string is a space
if str:sub(-2,-1) == duplicate_char .. " " then -- if last two chars of str are <sepc><space>
str = str:sub(1,-3); -- remove them both
end
end
if trim then
if value ~= comp then -- value does not equal comp when value contains html markup
local dup2 = duplicate_char;
if dup2:match( "%A" ) then dup2 = "%" .. dup2; end -- if duplicate_char not a letter then escape it
value = value:gsub( "(%b<>)" .. dup2, "%1", 1 ) -- remove duplicate_char if it follows html markup
else
value = value:sub( 2, -1 ); -- remove duplicate_char when it is first character
end
end
end
str = str .. value; --add it to the output string
end
end
return str;
end
--[[--------------------------< S T R I P _ A P O S T R O P H E _ M A R K U P >--------------------------------
Strip wiki italic and bold markup from argument so that it doesn't contaminate COinS metadata.
This function strips common patterns of apostrophe markup. We presume that editors who have taken the time to
markup a title have, as a result, provided valid markup. When they don't, some single apostrophes are left behind.
]]
local function strip_apostrophe_markup (argument)
if not is_set (argument) then return argument; end
while true do
if argument:match ("%'%'%'%'%'") then -- bold italic (5)
argument=argument:gsub("%'%'%'%'%'", ""); -- remove all instances of it
elseif argument:match ("%'%'%'%'") then -- italic start and end without content (4)
argument=argument:gsub("%'%'%'%'", "");
elseif argument:match ("%'%'%'") then -- bold (3)
argument=argument:gsub("%'%'%'", "");
elseif argument:match ("%'%'") then -- italic (2)
argument=argument:gsub("%'%'", "");
else
break;
end
end
return argument; -- done
end
--[[--------------------------< H A S _ I N V I S I B L E _ C H A R S >----------------------------------------
This function searches a parameter's value for nonprintable or invisible characters. The search stops at the
first match.
This function will detect the visible replacement character when it is part of the wikisource.
Detects but ignores nowiki and math stripmarkers. Also detects other named stripmarkers (gallery, math, pre, ref)
and identifies them with a slightly different error message. See also coins_cleanup().
Detects but ignores the character pattern that results from the transclusion of {{'}} templates.
Output of this function is an error message that identifies the character or the Unicode group, or the stripmarker
that was detected along with its position (or, for multi-byte characters, the position of its first byte) in the
parameter value.
]]
local function has_invisible_chars (param, v)
local position = ''; -- position of invisible char or starting position of stripmarker
local dummy; -- end of matching string; not used but required to hold end position when a capture is returned
local capture; -- used by stripmarker detection to hold name of the stripmarker
local i=1;
local stripmarker, apostrophe;
while cfg.invisible_chars[i] do
local char=cfg.invisible_chars[i][1] -- the character or group name
local pattern=cfg.invisible_chars[i][2] -- the pattern used to find it
position, dummy, capture = mw.ustring.find (v, pattern) -- see if the parameter value contains characters that match the pattern
if position then
if 'nowiki' == capture or 'math' == capture or -- nowiki and math stripmarkers (not an error condition)
('templatestyles' == capture) then -- templatestyles stripmarker allowed
stripmarker = true; -- set a flag
elseif true == stripmarker and 'delete' == char then -- because stripmakers begin and end with the delete char, assume that we've found one end of a stripmarker
position = nil; -- unset
elseif 'apostrophe' == char then -- apostrophe template uses ‍, hair space and zero-width space
apostrophe = true;
elseif true == apostrophe and in_array (char, {'zero width joiner', 'zero width space', 'hair space'}) then
position = nil; -- unset
else
local err_msg;
if capture then
err_msg = capture .. ' ' .. cfg.invisible_chars[i][3] or char;
else
err_msg = cfg.invisible_chars[i][3] or (char .. ' character');
end
return {err_msg, wrap_style ('parameter', param), position}; -- and done with this parameter
end
end
i=i+1; -- bump our index
end
end
--[[--------------------------< W R A P _ M S G >--------------------------------------------------------------
Applies additional message text to various parameter values. Supplied string is wrapped using a message_list
configuration taking one argument. Supports lower case text for {{citation}} templates. Additional text taken
from citation_config.messages - the reason this function is similar to but separate from wrap_style().
]]
local function wrap_msg (key, str, lower)
if not is_set (str) then
return '';
elseif in_array (key, cfg.messages['_safe_for_italics']) then
str = safe_for_italics (str);
end
if true == lower then
local msg;
msg = cfg.messages[key]:lower(); -- set the message to lower case before
return substitute (msg, str); -- including template text
else
return substitute (cfg.messages[key], str);
end
end
--[[--------------------------< K E R N _ Q U O T E S >--------------------------------------------------------
Apply kerning to open the space between the quote mark provided by the Module and a leading or trailing quote mark contained in a |title= or |chapter= parameter's value.
This function will positive kern either single or double quotes:
"'Unkerned title with leading and trailing single quote marks'"
" 'Kerned title with leading and trailing single quote marks' " (in real life the kerning isn't as wide as this example)
Double single quotes (italic or bold wikimarkup) are not kerned.
Call this function for chapter titles, for website titles, etc; not for book titles.
]]
local function kern_quotes (str)
local cap='';
local cap2='';
cap, cap2 = str:match ("^([\"\'])([^\'].+)"); -- match leading double or single quote but not double single quotes
if is_set (cap) then
str = wrap_style ('kern-left', {cap, cap2});
end
cap, cap2 = str:match ("^(.+[^\'])([\"\'])$")
if is_set (cap) then
str = wrap_style ('kern-right', {cap, cap2});
end
return str;
end
--[[--------------------------< P E N D _ S E P A R A T O R >--------------------------------------------------
]]
local function pend_separator (item, sepc, prepend)
if prepend then
return is_set (item) and sepc .. ' ' .. item or '';
else
return is_set (item) and item .. sepc .. ' ' or '';
end
end
--[[--------------------------< S E T _ S E L E C T E D _ M O D U L E S >--------------------------------------
Sets local cfg table to same (live or sandbox) as that used by the other modules.
]]
local function set_selected_modules (cfg_table_ptr)
cfg = cfg_table_ptr;
end
--[[--------------------------< E X P O R T S >----------------------------------------------------------------
]]
return {
first_set = first_set, -- exported functions
has_accept_as_written = has_accept_as_written,
has_invisible_chars = has_invisible_chars,
hyphen_to_dash = hyphen_to_dash,
in_array = in_array,
is_set = is_set,
kern_quotes = kern_quotes,
make_sep_list = make_sep_list,
pend_separator = pend_separator,
safe_join = safe_join,
substitude = substitude,
strip_apostrophe_markup = strip_apostrophe_markup,
substitute = substitute,
wrap_style = wrap_style,
wrap_msg = wrap_msg,
set_selected_modules = set_selected_modules
}
