共递归

提示：此条目页的主题不是互递归。

共递归在计算机科学重视一类操作，与递归在范畴论上对偶。因而递归是分析地工作，把数据分解为更小的数据直至达到基本情况。共递归是合成地工作，从基本情况构造出数据。共递归的数据是自己一点一点构造出来的。一个类似但不同的概念是生成式递归（generative recursion）。

共递归常与惰性求值配合，产生一个潜在无穷结构的有限子集。

已隐藏部分未翻译内容，欢迎参与翻译。

例子

Corecursion can be understood by contrast with recursion, which is more familiar. While corecursion is primarily of interest in functional programming, it can be illustrated using imperative programming, which is done below using the generator facility in Python. In these examples local variables are used, and assigned values imperatively (destructively), though these are not necessary in corecursion in pure functional programming. In pure functional programming, rather than assigning to local variables, these computed values form an invariable sequence, and prior values are accessed by self-reference (later values in the sequence reference earlier values in the sequence to be computed). The assignments simply express this in the imperative paradigm and explicitly specify where the computations happen, which serves to clarify the exposition.

Factorial

A classic example of recursion is computing the factorial, which is defined recursively as $0!:=1$ and $n!:=n\times (n-1)!$

To recursively compute its result on a given input, a recursive function calls (a copy of) itself with a different ("smaller" in some way) input and uses the result of this call to construct its result. The recursive call does the same, unless the base case has been reached. Thus a call stack develops in the process. For example, to compute fac(3), this recursively calls in turn fac(2), fac(1), fac(0) ("winding up" the stack), at which point recursion terminates with fac(0) = 1, and then the stack unwinds in reverse order and the results are calculated on the way back along the call stack to the initial call frame fac(3), where the final result is calculated as 3*2 =: 6 and finally returned. In this example a function returns a single value.

This stack unwinding can be explicated, defining the factorial corecursively, as an iterator, where one starts with the case of $1=:0!$, then from this starting value constructs factorial values for increasing numbers 1, 2, 3... as in the above recursive definition with "time arrow" reversed, as it were, by reading it backwards as $n!\times (n+1)=:(n+1)!$. The corecursive algorithm thus defined produces a stream of all factorials. This may be concretely implemented as a generator. Symbolically, noting that computing next factorial value requires keeping track of both n and f (a previous factorial value), this can be represented as:

$n,f=(0,1):(n+1,f\times (n+1))$

or in Haskell,

  (\(n,f) -> (n+1, f*(n+1))) `iterate` (0,1)

meaning, "starting from $n,f=0,1$, on each step the next values are calculated as $n+1,f\times (n+1)$". This is mathematically equivalent and almost identical to the recursive definition, but the $+1$ emphasizes that the factorial values are being built up, going forwards from the starting case, rather than being computed after first going backwards, down to the base case, with a $-1$ decrement. Note also that the direct output of the corecursive function does not simply contain the factorial $n!$ values, but also includes for each value the auxiliary data of its index n in the sequence, so that any one specific result can be selected among them all, as and when needed.

Note the connection with denotational semantics, where the denotations of recursive programs is built up corecursively in this way.

In Python, a recursive factorial function can be defined as:

def factorial(n):
    if n == 0:
        return 1
    else:
        return n * factorial(n - 1)

This could then be called for example as factorial(5) to compute 5!.

A corresponding corecursive generator can be defined as:

def factorials():
    n, f = 0, 1
    while True:
        yield f
        n, f = n + 1, f * (n + 1)

This generates an infinite stream of factorials in order; a finite portion of it can be produced by:

def n_factorials(k):
    n, f = 0, 1
    while n <= k:
        yield f
        n, f = n + 1, f * (n + 1)

This could then be called to produce the factorials up to 5! via:

for f in n_factorials(5):
    print(f)

If we're only interested in a certain factorial, just the last value can be taken, or we can fuse the production and the access into one function,

def nth_factorial(k):
    n, f = 0, 1
    while n < k:
        n, f = n + 1, f * (n + 1)
    yield f

As can be readily seen here, this is practically equivalent (just by substituting return for the only yield there) to the accumulator argument technique for tail recursion, unwound into an explicit loop. Thus it can be said that the concept of corecursion is an explication of the embodiment of iterative computation processes by recursive definitions, where applicable.

Fibonacci sequence

In the same way, the Fibonacci sequence can be represented as:

$a,b=(0,1):(b,a+b)$

Note that because the Fibonacci sequence is a recurrence relation of order 2, the corecursive relation must track two successive terms, with the $(b,-)$ corresponding to shift forward by one step, and the $(-,a+b)$ corresponding to computing the next term. This can then be implemented as follows (using parallel assignment):

def fibonacci_sequence():
    a, b = 0, 1
    while True:
        yield a
        a, b = b, a + b

In Haskell,

 map fst ( (\(a,b) -> (b,a+b)) `iterate` (0,1) )

Tree traversal

Tree traversal via a depth-first approach is a classic example of recursion. Dually, breadth-first traversal can very naturally be implemented via corecursion.

Without using recursion or corecursion, one may traverse a tree by starting at the root node, placing the child nodes in a data structure, then removing the nodes in the data structure in turn and iterating over its children. If the data structure is a stack (LIFO), this yields depth-first traversal, while if the data structure is a queue (FIFO), this yields breadth-first traversal.

Using recursion, a (post-order) depth-first traversal can be implemented by starting at the root node and recursively traversing each child subtree in turn (the subtree based at each child node) – the second child subtree does not start processing until the first child subtree is finished. Once a leaf node is reached or the children of a branch node have been exhausted, the node itself is visited (e.g., the value of the node itself is outputted). In this case, the call stack (of the recursive functions) acts as the stack that is iterated over.

Using corecursion, a breadth-first traversal can be implemented by starting at the root node, outputting its value, then breadth-first traversing the subtrees – i.e., passing on the whole list of subtrees to the next step (not a single subtree, as in the recursive approach) – at the next step outputting the value of all of their root nodes, then passing on their child subtrees, etc. In this case the generator function, indeed the output sequence itself, acts as the queue. As in the factorial example (above), where the auxiliary information of the index (which step one was at, n) was pushed forward, in addition to the actual output of n!, in this case the auxiliary information of the remaining subtrees is pushed forward, in addition to the actual output. Symbolically:

v,t = ([], FullTree) : (RootValues, ChildTrees)

meaning that at each step, one outputs the list of values of root nodes, then proceeds to the child subtrees. Generating just the node values from this sequence simply requires discarding the auxiliary child tree data, then flattening the list of lists (values are initially grouped by level (depth); flattening (ungrouping) yields a flat linear list).

These can be compared as follows. The recursive traversal handles a leaf node (at the bottom) as the base case (when there are no children, just output the value), and analyzes a tree into subtrees, traversing each in turn, eventually resulting in just leaf nodes – actual leaf nodes, and branch nodes whose children have already been dealt with (cut off below). By contrast, the corecursive traversal handles a root node (at the top) as the base case (given a node, first output the value), treats a tree as being synthesized of a root node and its children, then produces as auxiliary output a list of subtrees at each step, which are then the input for the next step – the child nodes of the original root are the root nodes at the next step, as their parents have already been dealt with (cut off above). Note also that in the recursive traversal there is a distinction between leaf nodes and branch nodes, while in the corecursive traversal there is no distinction, as each node is treated as the root node of the subtree it defines.

Notably, given an infinite tree, the corecursive breadth-first traversal will traverse all nodes, just as for a finite tree, while the recursive depth-first traversal will go down one branch and not traverse all nodes, and indeed if traversing post-order, as in this example (or in-order), it will visit no nodes at all, because it never reaches a leaf. This shows the usefulness of corecursion rather than recursion for dealing with infinite data structures.

In Python, this can be implemented as follows. The usual post-order depth-first traversal can be defined as:

def df(node):
    if node is not None:
        df(node.left)
        df(node.right)
        print(node.value)

This can then be called by df(t) to print the values of the nodes of the tree in post-order depth-first order.

The breadth-first corecursive generator can be defined as:

def bf(tree):
    tree_list = [tree]
    while tree_list:
        new_tree_list = []
        for tree in tree_list:
            if tree is not None:
                yield tree.value
                new_tree_list.append(tree.left)
                new_tree_list.append(tree.right)
        tree_list = new_tree_list

This can then be called to print the values of the nodes of the tree in breadth-first order:

for i in bf(t):
    print(i)

Definition

Initial data types can be defined as being the least fixpoint (up to isomorphism) of some type equation; the isomorphism is then given by an initial algebra. Dually, final (or terminal) data types can be defined as being the greatest fixpoint of a type equation; the isomorphism is then given by a final coalgebra.

If the domain of discourse is the category of sets and total functions, then final data types may contain infinite, non-wellfounded values, whereas initial types do not. On the other hand, if the domain of discourse is the category of complete partial orders and continuous functions, which corresponds roughly to the Haskell programming language, then final types coincide with initial types, and the corresponding final coalgebra and initial algebra form an isomorphism.

Corecursion is then a technique for recursively defining functions whose range (codomain) is a final data type, dual to the way that ordinary recursion recursively defines functions whose domain is an initial data type.

The discussion below provides several examples in Haskell that distinguish corecursion. Roughly speaking, if one were to port these definitions to the category of sets, they would still be corecursive. This informal usage is consistent with existing textbooks about Haskell. Also note that the examples used in this article predate the attempts to define corecursion and explain what it is.

Discussion

The rule for primitive corecursion on codata is the dual to that for primitive recursion on data. Instead of descending on the argument by pattern-matching on its constructors (that were called up before, somewhere, so we receive a ready-made datum and get at its constituent sub-parts, i.e. "fields"), we ascend on the result by filling-in its "destructors" (or "observers", that will be called afterwards, somewhere - so we're actually calling a constructor, creating another bit of the result to be observed later on). Thus corecursion creates (potentially infinite) codata, whereas ordinary recursion analyses (necessarily finite) data. Ordinary recursion might not be applicable to the codata because it might not terminate. Conversely, corecursion is not strictly necessary if the result type is data, because data must be finite.

In "Programming with streams in Coq: a case study: the Sieve of Eratosthenes" we find

hd (conc a s) = a               
tl (conc a s) = s

(sieve p s) = if div p (hd s) then sieve p (tl s)
              else conc (hd s) (sieve p (tl s))

hd (primes s) = (hd s)          
tl (primes s) = primes (sieve (hd s) (tl s))

where primes "are obtained by applying the primes operation to the stream (Enu 2)". Following the above notation, the sequence of primes (with a throwaway 0 prefixed to it) and numbers streams being progressively sieved, can be represented as

$p,s=(0,[2..]):(hd(s),sieve(hd(s),tl(s)))$

or in Haskell,

(\(p, s@(h:t)) -> (h, sieve h t)) `iterate` (0, [2..])

The authors discuss how the definition of sieve is not guaranteed always to be productive, and could become stuck e.g. if called with [5,10..] as the initial stream.

Here is another example in Haskell. The following definition produces the list of Fibonacci numbers in linear time:

fibs = 0 : 1 : zipWith (+) fibs (tail fibs)

This infinite list depends on lazy evaluation; elements are computed on an as-needed basis, and only finite prefixes are ever explicitly represented in memory. This feature allows algorithms on parts of codata to terminate; such techniques are an important part of Haskell programming.

This can be done in Python as well:

from itertools import tee, chain, islice, imap

def add(x, y):
    return x + y

def fibonacci():
    def deferred_output():
        for i in output:
            yield i
    result, c1, c2 = tee(deferred_output(), 3)
    paired = imap(add, c1, islice(c2, 1, None))
    output = chain([0, 1], paired)
    return result

for i in islice(fibonacci(), 20):
    print(i)

The definition of zipWith can be inlined, leading to this:

fibs = 0 : 1 : next fibs
  where
    next (a: t@(b:_)) = (a+b):next t

This example employs a self-referential data structure. Ordinary recursion makes use of self-referential functions, but does not accommodate self-referential data. However, this is not essential to the Fibonacci example. It can be rewritten as follows:

fibs = fibgen (0,1)
fibgen (x,y) = x : fibgen (y,x+y)

This employs only self-referential function to construct the result. If it were used with strict list constructor it would be an example of runaway recursion, but with non-strict list constructor this guarded recursion gradually produces an indefinitely defined list.

Corecursion need not produce an infinite object; a corecursive queue is a particularly good example of this phenomenon. The following definition produces a breadth-first traversal of a binary tree in linear time:

data Tree a b = Leaf a  |  Branch b (Tree a b) (Tree a b)

bftrav :: Tree a b -> [Tree a b]
bftrav tree = queue
  where
    queue = tree : gen 1 queue

    gen  0   p                 =         []           
    gen len (Leaf   _     : s) =         gen (len-1) s 
    gen len (Branch _ l r : s) = l : r : gen (len+1) s

This definition takes an initial tree and produces a list of subtrees. This list serves dual purpose as both the queue and the result (gen len p produces its output len notches after its input back-pointer, p, along the queue). It is finite if and only if the initial tree is finite. The length of the queue must be explicitly tracked in order to ensure termination; this can safely be elided if this definition is applied only to infinite trees.

Another particularly good example gives a solution to the problem of breadth-first labeling. The function label visits every node in a binary tree in a breadth first fashion, and replaces each label with an integer, each subsequent integer is bigger than the last by one. This solution employs a self-referential data structure, and the binary tree can be finite or infinite.

label :: Tree a b -> Tree Int Int 
label t = t′
    where
    (t′, ns) = go t (1:ns)

    go :: Tree a b    -> [Int]  -> (Tree Int Int, [Int])
    go   (Leaf   _    ) (n:ns) = (Leaf   n       , n+1 : ns  )
    go   (Branch _ l r) (n:ns) = (Branch n l′ r′ , n+1 : ns′′)
                                where
                                  (l′, ns′ ) = go l ns
                                  (r′, ns′′) = go r ns′

An apomorphism (such as an anamorphism, such as unfold) is a form of corecursion in the same way that a paramorphism (such as a catamorphism, such as fold) is a form of recursion.

The Coq proof assistant supports corecursion and coinduction using the CoFixpoint command.

历史

Corecursion, referred to as circular programming, dates at least to (Bird 1984), who credits John Hughes and Philip Wadler; more general forms were developed in (Allison 1989). The original motivations included producing more efficient algorithms (allowing 1 pass over data in some cases, instead of requiring multiple passes) and implementing classical data structures, such as doubly linked lists and queues, in functional languages.

参见

• Bisimulation
• 余归纳
• 递归
• Anamorphism

参考文献

• Bird, Richard Simpson. Using circular programs to eliminate multiple traversals of data. Acta Informatica. 1984, 21 (3): 239–250. doi:10.1007/BF00264249. 
• Lloyd Allison. Circular Programs and Self-Referential Structures. Software Practice and Experience. April 1989, 19 (2): 99–109 [2017-12-01]. doi:10.1002/spe.4380190202. （原始内容存档于2009-07-21）. 
• Geraint Jones and Jeremy Gibbons. Linear-time breadth-first tree algorithms: An exercise in the arithmetic of folds and zips (技术报告). Dept of Computer Science, University of Auckland. 1992 [2017-12-01]. （原始内容存档于2012-10-06）. 
• Jon Barwise; Lawrence S Moss. Vicious Circles. Center for the Study of Language and Information. June 1996 [2017年12月1日]. ISBN 978-1-57586-009-1. （原始内容存档于2010年6月21日）. 
• Lawrence S Moss; Norman Danner. On the Foundations of Corecursion. Logic Journal of the IGPL. 1997, 5 (2): 231–257 [2017-12-01]. doi:10.1093/jigpal/5.2.231. （原始内容存档于2012-10-15）. 
• Kees Doets; Jan van Eijck. The Haskell Road to Logic, Maths, and Programming. King's College Publications. May 2004 [2017-12-01]. ISBN 978-0-9543006-9-2. （原始内容存档于2019-05-11）. 
• David Turner. Total Functional Programming. Journal of Universal Computer Science. 2004-07-28, 10 (7): 751–768 [2017-12-01]. doi:10.3217/jucs-010-07-0751. （原始内容存档于2020-11-14）. 
• Jeremy Gibbons; Graham Hutton. Proof methods for corecursive programs. Fundamenta Informaticae Special Issue on Program Transformation. April 2005, 66 (4): 353–366 [2017-12-01]. （原始内容存档于2015-09-09）. 
• Leon P Smith, Lloyd Allison's Corecursive Queues: Why Continuations Matter, The Monad Reader, 2009-07-29, (14): 37–68 [2017-12-01], （原始内容存档于2020-08-14） 
• Raymond Hettinger. Recipe 576961: Technique for cyclical iteration. 2009-11-19 [2017-12-01]. （原始内容存档于2009-11-25）. 
• M. B. Smyth and G. D. Plotkin. The Category-Theoretic Solution of Recursive Domain Equations. SIAM Journal on Computing. 1982, 11 (4): 761–783. doi:10.1137/0211062. 
• Leclerc, Francois; Paulin-Mohring, Christine. Programming with Streams in Coq: A Case Study: the Sieve of Eratosthenes. Types for Proofs and Programs: International Workshop TYPES '93. Springer-Verlag New York, Inc. 1993: 191–212. ISBN 3-540-58085-9.