使用者:Wener-6022/平拋運動

Parabolic water motion trajectory
Components of initial velocity of parabolic throwing

Projectile motion is a form of motion experienced by an object or particle (a projectile) that is projected near the Earth's surface and moves along a curved path under the action of gravity only (in particular, the effects of air resistance are assumed to be negligible). This curved path was shown by Galileo to be a parabola, but may also be a line in the special case when it is thrown directly upwards. The study of such motions is called ballistics, and such a trajectory is a ballistic trajectory. The only force of significance that acts on the object is gravity, which acts downward, thus imparting to the object a downward acceleration. Because of the object's inertia, no external horizontal force is needed to maintain the horizontal velocity component of the object. Taking other forces into account, such as friction from aerodynamic drag or internal propulsion such as in a rocket, requires additional analysis. A ballistic missile is a missile only guided during the relatively brief initial powered phase of flight, and whose subsequent course is governed by the laws of classical mechanics.||平拋運動是物體或粒子在地球表面被投射在僅受重力作用的情況下沿曲線運動的運動形式。(通常的,空氣阻力在此忽略不計),這條曲線被伽利略展示被叫做拋物線,但在特殊情況下向上拋擲會是一條直線。對這種運動的研究稱之為彈道學。而這樣的軌跡就稱之為彈道軌跡,唯一作用在物體上的力就是作用力向下重力,從而賦予物體一個向下的加速度。因為物體的慣性,無需外部作用力保持水平。考慮其他力時需要其他分析比如火箭與空氣的摩擦阻力或內部推進力。彈道飛彈只在相對簡短的初始動力飛行階段進行引導,其後繼路線受古典力學的支配。

Ballistics (gr. βάλλειν ('ba'llein'), "to throw") is the science of mechanics that deals with the flight, behavior, and effects of projectiles, especially bullets, unguided bombs, rockets, or the like; the science or art of designing and projectiles so as to achieve a desired performance.||彈道學(希臘文:βάλλειν,('ba'llein'), "to throw")是研究拋擲物(如比如子彈、非制導武器、火箭)的飛行軌跡、表現和影響的力學,設計和加速使性能升級的科學或藝術。

Trajectories of a projectile with air drag and varying initial velocities

The elementary equations of ballistics neglect nearly every factor except for initial velocity and an assumed constant gravitational acceleration. ||彈道學的基本方程忽略了除了初始速度和假定恆定的重力加速度以外的的所有因素。Practical solutions of a ballistics problem often require considerations of air resistance, cross winds, , varying acceleration due to gravity, and in such problems as launching a rocket from one point on the Earth to another, the rotation of the Earth.|彈道問題的現實解決方案通常需要考慮空氣阻力,逆風,目標運動,由重力而變化的加速度,以及從地球上一個點向另一個點發射火箭的問題(需考慮地球自轉)| Detailed mathematical solutions of practical problems typically do not have closed-form solutions, and therefore require numerical methods to address.|實際問題的詳細數學解決方案通常沒有解析解,需要用數值分析來解決。

The initial velocity

Let the projectile be launched with an initial velocity  , which can be expressed as the sum of horizontal and vertical components as follows:

 .

The components   and   can be found if the initial launch angle,  , is known:

 ,
 

Kinematic quantities of projectile motion

In projectile motion, the horizontal motion and the vertical motion are independent of each other; that is, neither motion affects the other. This is the principle of compound motion established by Galileo in 1638,[1] and used by him to prove the parabolic form of projectile motion [2].

 
The horizontal and vertical components of a projectile's velocity are independent of each other.

A ballistic trajectory is a parabola with homogeneous acceleration, such as in a space ship with constant acceleration in absence of other forces. On Earth the acceleration changes magnitude with altitude and direction with latitude/longitude. This causes an elliptic trajectory, which is very close to a parabola on a small scale. However, if an object was thrown and the Earth was suddenly replaced with a black hole of equal mass, it would become obvious that the ballistic trajectory is part of an elliptic orbit around that black hole, and not a parabola that extends to infinity. At higher speeds the trajectory can also be circular, parabolic or hyperbolic (unless distorted by other objects like the Moon or the Sun). In this article a homogeneous acceleration is assumed.

Acceleration

Since there is only acceleration in the vertical direction, the velocity in the horizontal direction is constant, being equal to  . The vertical motion of the projectile is the motion of a particle during its free fall. Here the acceleration is constant, being equal to g.[3] The components of the acceleration are:

 ,
 .

Velocity

The horizontal component of the velocity of the object remains unchanged throughout the motion. The vertical component of the velocity changes linearly,[4] because the acceleration due to gravity is constant. The accelerations in the x and y directions can be integrated to solve for the components of velocity at any time t, as follows:

 ,
 .

The magnitude of the velocity (under the Pythagorean theorem, also known as the triangle law):

 .

Displacement

 
Displacement and coordinates of parabolic throwing

At any time  , the projectile's horizontal and vertical displacement are:

 ,
 .

The magnitude of the displacement is:

 .

Consider the equations,

 .

If t is eliminated between these two equations the following equation is obtained:

 .

Since g, θ, and v0 are constants, the above equation is of the form

 ,

in which a and b are constants. This is the equation of a parabola, so the path is parabolic. The axis of the parabola is vertical.

If the projectile's position (x,y) and launch angle (θ or α) are known, the initial velocity can be found solving for v0 in the aforementioned parabolic equation:

 .

Time of flight or total time of the whole journey

The total time t for which the projectile remains in the air is called the time of flight.

 

After the flight, the projectile returns to the horizontal axis (x-axis), so  .

 
 
 
 

Note that we have neglected air resistance on the projectile.

If the starting point is at height y0 with respect to the point of impact, the time of flight is:

 

As above, this expression can be reduced to

 

if θ is 45° and y0 is 0.

Maximum height of projectile

 
Maximum height of projectile

The greatest height that the object will reach is known as the peak of the object's motion. The increase in height will last until  , that is,

 .

Time to reach the maximum height(h):

 .

For the vertical displacement of the maximum height of projectile:

 
  .

Relation between horizontal range and maximum height

The relation between the range R on the horizontal plane and the maximum height h reached at   is:

 

Proof

 

 
  ×  
 

 .

Maximum distance of projectile

 
The maximum distance of projectile

The range and the maximum height of the projectile does not depend upon its mass. Hence range and maximum height are equal for all bodies that are thrown with the same velocity and direction. The horizontal range d of the projectile is the horizontal distance it has traveled when it returns to its initial height ( ).

 .

Time to reach ground:

 .

From the horizontal displacement the maximum distance of projectile:

 ,

so[5]

 .

Note that d has its maximum value when

 ,

which necessarily corresponds to

 ,

or

 .
 
Trajectories of projectiles launched at different elevation angles but the same speed of 10 m/s in a vacuum and uniform downward gravity field of 10 m/s2. Points are at 0.05 s intervals and length of their tails is linearly proportional to their speed. t = time from launch, T = time of flight, R = range and H = highest point of trajectory (indicated with arrows).

The total horizontal distance (d) traveled.

 

When the surface is flat (initial height of the object is zero), the distance traveled:

 

Thus the maximum distance is obtained if θ is 45 degrees. This distance is:

 

Application of the work energy theorem

According to the work-energy theorem the vertical component of velocity is:

 .


These formulae ignore aerodynamic drag and also assume that the landing area is at uniform height 0.

Angle of reach

The "angle of reach" is the angle (θ) at which a projectile must be launched in order to go a distance d, given the initial velocity v.

 

There are two solutions:

 

and

 

Angle required to hit coordinate (x,y)

 
Vacuum trajectory of a projectile for different launch angles. Launch speed is the same for all angles, 50 m/s if "g" is 10 m/s2.

To hit a target at range x and altitude y when fired from (0,0) and with initial speed v the required angle(s) of launch θ are:

 

The two roots of the equation correspond to the two possible launch angles, so long as they aren't imaginary, in which case the initial speed is not great enough to reach the point (x,y) selected. This formula allows one to find the angle of launch needed without the restriction of  .

One can also ask what launch angle allows the lowest possible launch velocity. This occurs when the two solutions above are equal, implying that the quantity under the square root sign is zero. This requires solving a quadratic equation for  , and we find

 

This gives

 

If we denote the angle whose tangent is y/x by α, then

 
 
 
 

This implies

 

In other words, the launch should be at the angle halfway between the target and Zenith (vector opposite to Gravity)

Total Path Length of the Trajectory

The length of the parabolic arc traced by a projectile, given that the height of launch and landing is the same and that there is no air resistance, is given by the formula:

 

where   is the initial velocity,   is the launch angle and   is the acceleration due to gravity as a positive value. The expression can be obtained by evaluating the arc length integral for the height-distance parabola between the bounds initial and final displacements (i.e. between 0 and the horizontal range of the projectile) such that:

 .

Trajectory of a projectile with air resistance

 
Trajectories of a mass thrown at an angle of 70°:
  without drag
  with Stokes drag
  with Newton drag

In this section we will take air resistance to be in direct proportion to the velocity of the particle (i.e.  ). This is only valid at Reynolds number below about 1000. In air, which has a kinematic viscosity around 0.15 cm2/s this means that the product of speed and diameter must be less than about 150 cm2/s which is obviously not usually the case. We do this though so that the equations describing the particle's motion are easily solved. At higher values of speed times diameter (high Reynolds number) the force of air resistance is proportional to the square of the particle's velocity (see drag equation). Here,  ,  and   will be used to denote the initial velocity, the velocity along the direction of x and the velocity along the direction of y, respectively. The mass of the projectile will be denoted by m. For the derivation only the case where   is considered. Again, the projectile is fired from the origin (0,0).

File:Free body diagram2.png
Free body diagram of a body on which only gravity and air resistance acts

The free body diagram on the right is for a projectile that experiences air resistance and the effects of gravity. Here, air resistance is assumed to be in the direction opposite of the projectile's velocity.   (actually   is more realistic, but not used here, to ensure an analytic solution,) is written due to the initial assumption of direct proportionality implies that the air resistance and the velocity differ only by a constant arbitrary factor with units of N*s/m.

The relationships that represent the motion of the particle are derived by Newton's Second Law, both in the x and y directions. In the x direction   and in the y direction  .

This implies that:

  (1),

and

  (2)

Solving (1) is an elementary differential equation, thus the steps leading to a unique solution for vx and, subsequently, x will not be enumerated. Given the initial conditions   (where vxo is understood to be the x component of the initial velocity) and   for  :

  (1a)

  (1b)

While (1) is solved much in the same way, (2) is of distinct interest because of its non-homogeneous nature. Hence, we will be extensively solving (2). Note that in this case the initial conditions are used   and   when  .

  (2)

  (2a)

This first order, linear, non-homogeneous differential equation may be solved a number of ways; however, in this instance, it will be quicker to approach the solution via an integrating factor  .

  (2c)

  (2d)

  (2e)

 (2f)

  (2g)

And by integration we find:

  (3)

Solving for our initial conditions:

  (2h)

  (3a)

With a bit of algebra to simplify (3a):

  (3b)

An example is given using values for the mass and terminal velocity for a baseball taken from [1].

m = 0.145 kg (5.1 oz)
v0 = 44.7 m/s (100 mph)
g = -9.81 m/s² (-32.2 ft/s²)
vt = -33.0 m/s (-73.8 mph)
 .
 
File:BaseballProjectileGraph.svg

The more realistic trajectory   can not be calculated analytically, but only by numerical simulations.

Similarly to above:

 

 

 

However, this takes advantage of the fact that horizontally, acceleration is always negative. As acceleration is negative while velocity is positive and positive while velocity is negative, a projectile fired upwards requires the absolute value to be taken of the vertical velocity, which makes an analytical solution for vertical position more complex.

Where   is gravitational acceleration set to some constant, such as standard gravity:

  for constant gravity

or, even more complex,

  for gravity as a function of height above a planet's surface, where

  •   is the planet's gravity at the surface.
  • r is the planet's radius.

Time of flight with air resistance

The total time of the journey in the presence of air resistance (more specifically, when  ) can be calculated by the same strategy as above, namely, we solve the equation  . While in the case of zero air resistance this equation can be solved elementarily, here we shall need the Lambert W function. The equation   is of the form  , and such an equation can be transformed into an equation solvable by the   function (see an example of such a transformation here). Some algebra shows that the total time of flight, in closed form, is given as

 

Solution by numerical integration

A solution to the problem of motion of a projectile with air resistance modelled as   follows.

The following assumptions are made:

 
Where:

The approach will be to formulate expressions that will later be used to demonstrate a numerical solution of the stated problem.

Derivation of integral expressions

A projectile of mass m is launched from a point  , with an initial velocity   in an initial direction that makes an angle   with the horizontal. It experiences air resistance that is given by   that acts tangentially to the path of travel at any point.

Newton's second law of motion is  . Applying this in the x-direction yields;

  1

Where,  ,   and   are the horizontal and vertical components of the velocity   respectively.

Let  ,  , and  . Equation (1) now becomes;

  A

In the y-direction;

  2

Again let,  ,  , and  . Equation (2) is now;

  B

Knowing that   we may divide equation (B) by equation (A) to get;

  C

Introduce a quantity   such that  , then;

  D

From equations (C) and (D), observe that;  

Hence,   which may be re-written as;  

Separate variables and integrate as;

  E

The left-hand side of equation (E) is  

For the right-hand side, let  , such that   and,  

Thus  . Also  

Hence;  

Equation (E) is now;  

From which;

 

Since  

 

Denote  , such that;

  F
  G

At the beginning of the motion,   and  

Hence;  , such that;  

As the motion proceeds,   and  , i.e.,  , and  

This means that,   and  

Hence;  

In equations (F) and (G), observe that;

As  ,  

When a state of dynamic equilibrium is attained under vertical free fall, the opposing forces of gravity and drag are equalized, i.e.,  

  H

In equation (A), substitutions for   and   from equations (F) and (G) yields;

 

Also;  

Knowing that;  , we may write

 
  I

Also;  

  J

And;  

  K

Time of flight

Determine the time of flight   by setting   to   in equation (K) above. Solve for the value of the variable  .

  L

Equation (I) with   substituted for   gives;

  M

Horizontal range

Equation (J) gives the horizontal range R as;

  N

Maximum height

At the highest point of the projectile path  , and  , giving the maximum height from equation (K) as;

  O

Numerical simulation

A numerical solution of a projectile modelled as a baseball (also from [2]), with the parameters listed below follows;

 

A computer program in the form of a Python script is used for the numerical solution. The script uses the libraries numpy (for arrays), scipy (for numerical integration by gaussian quadrature, and for root-finding by Newton's method), and matplotlib (for plotting).

Results of analysis:

  • Time of flight (s)  : 6.608
  • Horizontal range (m)  : 43.667
  • Maximum height (m)  : 53.444
#!/usr/bin/env python
from math import pi, radians, degrees, sin, cos, atan, sqrt, sinh, cosh, asinh
import numpy as np
from scipy.integrate import quadrature
from scipy.optimize import newton
import matplotlib.pyplot as plt

# Parameters of projectile (Modelled after a baseball)
V_0     = 44.7                 # Initial velocity (m/s)
g       = 9.81                 # Acceleration due to gravity (m/s^2)
psi     = 75                   # Launch angle (deg.)
c       = 0.5                  # Drag coefficient (spherical projectile)
r       = 0.0366               # Radius of projectile (m)
m       = 0.145                # Mass of projectile (kg)
rho_air = 1.29                 # Air density (kg/m^3)
a       = pi * r**2.0          # Cross-sectional area of projectile (m^2)
psi     = radians(psi)         # Convert to radians

# Display of parameters
print('Parameters:')
print('Launch angle (deg.)                      : {:.3f}'.format(degrees(psi)))
print('Launch speed (m/s)                       : {:.3f}'.format(V_0))
print('Drag coefficient - Spherical projectile  : {:.3f}'.format(c))
print('Radius of spherical projectile (m)       : {:.3f}'.format(r))
print('Mass of projectile (kg)                  : {:.3f}'.format(m))
print('Air density (kg/m^3)                     : {:.3f}'.format(rho_air))
print('Cross-sectional area of projectile       : {:.3f}'.format(a))

# Initial position and launch velocity
x_0 = 0.0
u_0 = V_0 * cos(psi)
y_0 = 0.0
v_0 = V_0 * sin(psi)

# Constants and function definitions for solution
mu = 0.5 * c * rho_air * a / m
Q_0 = asinh(v_0 / u_0)
A   = g / (mu * u_0**2.0) + (Q_0 + 0.5 * sinh(2.0 * Q_0))

def lam(Q):
    return A - (Q + 0.5 * sinh(2.0 * Q))

def u_s(Q):
    return sqrt(g / mu) / sqrt(lam(Q))

def v_s(Q):
    return sqrt(g / mu) * sinh(Q) / sqrt(lam(Q))

def f_t(Q):
    return cosh(Q) / sqrt(lam(Q))

def f_x(Q):
    return cosh(Q) / lam(Q)

def f_y(Q):
    return sinh(2.0 * Q) / lam(Q)

def t_s(Q):
    return - quadrature(f_t, Q_0, Q, vec_func=False)[0] / sqrt(g * mu)

def x_s(Q):
    return x_0 - quadrature(f_x, Q_0, Q, vec_func=False)[0] / mu

def y_s(Q):
    return y_0 - quadrature(f_y, Q_0, Q, vec_func=False)[0] / (2.0 * mu)

def y_s_p(Q):
    return -(1.0 / (2.0 * mu)) * sinh(2.0 * Q) / lam(Q)

# Time of flight
Q_T_est = asinh(-v_0 / u_0)      # Initial estimate for Newton's method
Q_T = newton(y_s, Q_T_est, y_s_p)
T = t_s(Q_T)
print('\nResults:')
print('Time of flight (s)                       : {:.3f}'.format(T))

# Horizontal range
R = x_s(Q_T)
print('Horizontal range (m)                     : {:.3f}'.format(R))

# Maximum height
H = y_s(0.0)
print('Maximum height (m)                       : {:.3f}'.format(H))

# Vectorize scalar functions
t_vec = np.vectorize(t_s)
x_vec = np.vectorize(x_s)
y_vec = np.vectorize(y_s)
u_vec = np.vectorize(u_s)
v_vec = np.vectorize(v_s)

# Array for variable 'Q'
N = 101
psi_T = degrees(atan(sinh(Q_T)))
Q = np.arcsinh(np.tan(np.radians(np.linspace(degrees(psi), psi_T, N))))

# Arrays for projectile path variables
t = t_vec(Q)
x = x_vec(Q)
y = y_vec(Q)
u = u_vec(Q)
v = v_vec(Q)

# Plot of trajectory
fig, ax = plt.subplots()
line, = ax.plot(x, y, 'r-', label='Numerical')
ax.set_title(r'Projectile path')
ax.set_aspect('equal')
ax.grid(b=True)
ax.legend()
ax.set_xlabel('x (m)')
ax.set_ylabel('y (m)')
plt.show()

# Plot of velocity components
fig, ax = plt.subplots()
line, = ax.plot(t, u, 'b-', label='u')
ax.set_title(r'Horizontal velocity component')
ax.grid(b=True)
ax.legend()
ax.set_xlabel('t (s)')
ax.set_ylabel('u (m/s)')
plt.show()

fig, ax = plt.subplots()
line, = ax.plot(t, v, 'b-', label='v')
ax.set_title(r'Vertical velocity component')
ax.grid(b=True)
ax.legend()
ax.set_xlabel('t (s)')
ax.set_ylabel('v (m/s)')
plt.show()

Lofted trajectory

 
Lofted trajectories of North Korean missiles Hwasong-14 and Hwasong-15

A special case of a ballistic trajectory for a rocket is a lofted trajectory, a trajectory with an apogee greater than the minimum-energy trajectory to the same range. In other words, the rocket travels higher and by doing so it uses more energy to get to the same landing point. This may be done for various reasons such as increasing distance to the horizon to give greater viewing/communication range or for changing the angle with which a missile will impact on landing. Lofted trajectories are sometimes used in both missile rocketry and in spaceflight.[6]

References

  1. ^ Galileo Galilei, Two New Sciences, Leiden, 1638, p.249
  2. ^ Nolte, David D., Galileo Unbound (Oxford University Press, 2018) pp. 39-63.
  3. ^ The g is the acceleration due to gravity. (  near the surface of the Earth).
  4. ^ decreasing when the object goes upward, and increasing when it goes downward
  5. ^  
  6. ^ Ballistic Missile Defense, Glossary, v. 3.0, US Department of Defense, June 1997.